![]() The hood filter is the first layer of protection in any restaurant's grease containment and exhaust ventilation system. We offer extractor hood repairs across the country, so get in touch if you need help and you can get back to having a fresh smelling, smoke-free kitchen in no time.An exhaust hood filter is a necessary and required for any commercial restaurant kitchen to operate smoothly, safely and efficiently. If you cleaned your cooker hood because it was under-performing and you thought it might be a build-up of grease, but it’s not helped, it might be an internal fault with the motor or control switch. Once the grease is all removed, use a household glass cleaner to create a sparkling finish.This should clear all the grease build up fairly quickly, but it might take several passes.Use a grease removing detergent or washing up liquid to dissolve the grease.Just like with stainless steel, mix bicarb of soda with boiling water and softly scrub the hood all over to loosen the grime, using paper towels to get rid of the excess solution as you go.Dry with a cloth or allow to air dry before optionally applying a coat of stainless steel polish if you want an extra glossy finish.Wash gently with warm water to remove all remains.Use a household grease removing product (or try making your own!) and a cloth, wiping the hood and removing the now loosened grease and dust.Mix bicarbonate of soda with boiling water and use a sponge to gently scrub the hood with the solution.Most extractor hoods are made of either stainless steel or glass, so we’ll cover both here! Cleaning a stainless steel extractor hood The surface of extractor hoods also pick up a layer of grease over time and dust can collect too, creating a sticky, fluffy coating on what was once a pristine surface. It’s not just the filters that can get dirty, however. If after a few washes they are still blocked you might need to think about replacing them.If the filters are still blocked with grease then repeat the process again to try to clear it out. ![]() Put the filters in the dishwasher on the hottest program available.Reinsert the filters into the extractor hood.Rinse thoroughly and pat dry or allow to fully air dry.If you could only fit half of the filter in the water, repeat for the other side. ![]() After they’ve soaked, scrub them gently with a brush (make sure it’s not too stiff a brush to avoid damaging the filters), rinsing occasionally until all of the grease build up is cleared.Put the filters in the hot water and let them soak for at least 10 minutes.Fill your sink, a large pan, or a large bucket (big enough to fit at least half of the filter in) with boiling water and mix in baking soda and dish soap.They serve to keep all of the grease that cooking smoke contains out of the extraction vents to avoid them being clogged and more expensive cleaning tasks being necessary.Ĭleaning your extractor hood filters is a simple process: Method 1 How to clean extractor hood filtersĮxtractor hood filters are the fine mesh grates that are on the underside of the hood. The longer you put off cleaning your extractor hood and filter, the less effective it will be and the harder you’ll have to work to get it clean.īe proactive and get your extractor hood back to full working order by following our guide to cleaning both the hood itself and the important filters. ![]() What can be avoided, though, is a thick layer of grease building up and making it both dirty and less effective. It’s one of nature’s laws.īecause your cooking hood lives right above your hob and its primary purpose is to draw up the smoke or steam that your cooking food gives off, there’s no avoiding it getting slightly greasy over time. Grease, grime and dirt love to build up on extractor hoods. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |